In this entry I will focus on the mold that I have planned to do. For the mold, a topic also sensitive not think that has to be sturdy enough to withstand the pressure that we apply to the mix, and it must be of suitable material for the "stripping." If it were mader aquizás not meet these requirements so we have to think of alternatives. Advantage that I have a friend who owns a metalwork company, commissioned the mold. First, I mention my intention to verify their viability in storage plant production. To be viable, I make a drawing with the dimensions of the mold I want.
The mold must have rope and pretend blight dimensions for the block, thick and slightly larger to allow further compaction of the material and also allow the fabrication of a thick block more.
Below you will see a small drawing done with a 2D drawing tool, and I sent the company to facilitate processing.
The result is what is shown in the picture below. I've done a little later than expected, but the result is very good.
0 comments:
Post a Comment